Technical data

Installation 1
Agilent Multimode for 6210/6220 TOF Installation and Maintenance Guide 13
Figure 3 Remove the U6 and U18 chips from their sockets
9 Locate the chip with the part number G1978-80200. Find the correct
orientation of the chip so that it fits into the socket. Press the G1978-80200
chip into the U18 socket.
10 Locate the chip with part number G1978-80100. Find the correct
orientation of the chip so that it fits into the socket. Press the G1978-80100
chip into the U6 socket.
11 After upgrading the chips on the PDB, reinstall the PDB in the E-tub. Leave
the analyzer 3 board out until Step 4 has been completed.
U6 Socket
U18 Socket
CAUTION
Be sure that the chip is completely in the socket. Otherwise, when the board is
energized the chip will be destroyed.
CAUTION
Be sure that the chip is completely in the socket. Otherwise, when the board is
energized the chip will be destroyed.