Service manual

Figures
.
l-l. Cable Configurations . . . . . . . . . . . . .
11
-
3-1. Return Loss Test Setup . . . . . . . . . . . .
33
-
3-2. Location of the Gates and the Airline . . . . . .
33
-
3-3. Insertion Loss Test Setup . . . . . . . . . . .
34
-
A-1. Where to Position Wrenches to Connect or
Disconnect an NMD-2.4 mm Connector to a Test
Port . . . . . . . . . . . . . . . . . . .
A-2
A-2. Where to Position Wrenches to Connect a 2.4 mm
Connector to a DUT . . . . . . . . . . . .
A-4
Tables
2-1. Environmental Specifications . . . . . . . . . .
21 -
2-2. Electrical Specifications . . . . . . . . . . . .
2-3. Supplemental Characteristics (1 of 3) . . . . . .
3-1. Test Record (1 of 3) . . . . . . . . . . . . .
4-l. Replaceable Parts . . . . . . . . . . . . . .
A-l. Hewlett-Packard S&s and Service Offices . . . .
21
212
3-7
42
A:5
Contents-2
HP 85133E/F
1