User manual

5
Technical Information
Installation
60/70 MiniVac Controller User Manual / 87-900-049-01 (H)
Figure 10 P001 Mating Connector and J001 Accessory Connector
Pump Connection
The pump is connected to the controller rear panel via the high
voltage connector by a coaxial high voltage cable assembly.
WARNING!
 High voltage can cause severe injury or death.
Before installing or removing the connector:
- Turn the power off.
- When connecting the cable to 2 l/s pumps, or larger, be
sure that the ground spring is in place on the high voltage
connection of the pump.
- Install the pump connector and secure it with screws.
- Plug the controller connector.