User manual

4
Instructions for Use
Installation
42/70 MiniVac Controller User Manual / 87-900-049-01 (H)
Each controller is factory set for a specific power supply:
 Model 929-0190 KINGS type High voltage connector
(120 Vac, 50 – 60 Hz)
 Model 929-0191 FISCHER type High voltage connector
(120 Vac, 50 – 60 Hz)
 Model 929-0290 FISCHER type High voltage connector
(220 Vac, 50 – 60 Hz)
 Model 929-0291 KINGS type High voltage connector
(220 Vac, 50 – 60 Hz)
Installation
WARNING!
The controller is equipped with a 3-wire power cord and plug
(internationally approved) for user's safety. Use this power cord and plug in
conjunction with a properly grounded power socket to avoid electrical shock.
High voltage developed in the controller can cause severe injury or death.
Before servicing the unit, disconnect the input power cable.
NOTE
The controller must be installed inside a rack module, but it must be positioned
so that free air can flow through the holes. Do not install or use the controller in
an environment exposed to atmospheric agents (rain, snow, ice), dust,
aggressive gases, or in explosive environments or those with a high fire risk.