User`s guide

11
Software applications (continued)
Random errors observed in CAN decode
while triggering on data frame ID: 07F
HEX
.
CRC error
CAN/LIN triggering and decode
(N5424A or Option AMS on new
scope purchases)
Trigger on and decode serially
transmitted data based on CAN and
LIN protocols. This application not
only provides triggering on complex
serial signals, but also provides
unique hardware-accelerated decode
capabilities. Hardware-assisted
triggering and decode guarantees
you will never miss a trigger event or
FlexRay triggering and decode
(N5432A or Option FRS on new
scope purchases)
FlexRay protocol is based on
time-triggered and deterministic
architecture. Agilent's FlexRay solution
for the 6000 Series mixed signal
oscilloscopes offers a robust set
of FlexRay frame, slot, and error
triggering, including the ability
Mixed-signal measurements in a FlexRay
system using an MSO.
anomaly – unlike other scopes that
have triggering dead time between
acquisitions.
This application requires a 4-channel
DSO or 4-channel MSO and can use
any combination of scope or logic
acquisition channels.
For more information:
www.agilent.com/find/CAN-LIN
to trigger on specific FlexRay
communications qualified on
base-cycle and cycle-repetition. This
solution combines an Agilent 6000
Series mixed signal oscilloscope (MSO)
with a DECOMSYS::BUSDOCTOR 2
protocol analyzer.
For more information:
www.agilent.com/find/flexray