User`s guide

10
Software applications
FPGA dynamic probe
(N5406A for Xilinx, N5434A for Altera)
Give your MSO internal FPGA visibility.
Agilent’s MSO FPGA dynamic probe
provides internal FPGA visibility
and quick instrument setup using
an innovative core-assisted debug
approach. Measurement tasks that
previously took hours can be done in
a few mouse clicks. In a few seconds,
easily measure a different set of
internal signals without changing your
FPGA design.
For more information:
www.agilent.com/find/6000-altera
www.agilent.com/find/6000-xilinx
Debug and validate your FPGA designs
faster and more effectively with FPGA
dynamic probe and Agilent MSO.
Expand the capability of the 6000 Series
scopes to get up to 2% error vector
magnitude measurements.
Vector signal analysis
Expand the measurement capability
of your 6000 Series scope with
the 89601A vector signal analysis
software. This advanced DSP based
software takes the digitized signal data
provided by the scope and provides
FFT based spectrum analysis and wide
bandwidth digital modulation analysis.
Use these capabilities to demodulate
wireless communication signals like
WCDMA and cdma2000, and wireless
networking signals like 802.11 WiFi and
802.16 WiMax. Take advantage of the
super wide bandwidth of your scope to
capture and evaluate radar signals.
For more information:
www.agilent.com/find/6000-vsa
On-screen serial decode of an I
2
C packet.
I
2
C/SPI serial trigger and decode
(N5423A or Option LSS on new
scope purchases)
This application displays real-time
time-aligned decode of I
2
C and SPI
serial buses. Hardware-assisted
triggering and decode provide the
industries fastest throughput and
update rate. Hardware-assisted
triggering and decode guarantees
you will never miss a trigger event or
anomaly – unlike other scopes that
have triggering dead time between
acquisitions.
This application requires a 4-channel
DSO or 4-channel MSO and can use
any combination of the scope or logic
acquisition channels.
For more information:
www.agilent.com/find/I2C-SPI