Technical data

86 6000 Series Oscilloscopes Service Guide
4 Troubleshooting
• On 6000L Series models, press the power switch.
The Power indicator LED is green. The LAN indicator LED
is bi- color (green and/or red).
• Shortly after pressing the power switch, the power
indicator and LAN indicator will illuminate.
• Both will extinguish.
• Both will illuminate again. If a LAN is connected, the
LAN indicator will illuminate red. It will turn green
when the LAN is connected as it is configured. The
amount of time it takes the indicator to turn green
depends on the network and the oscilloscope’s LAN
configuration setup.
Figure 12 6000L Series LED indicators
4 If the lights illuminate, then the power supply is probably
working correctly.
5 Proceed to “To verify basic oscilloscope operation” on
page 87.
LAN
Status
Indicator
Power
Switch
Power
Indicator
Reset
Switch
6000_series_service_guide.book Page 86 Friday, March 23, 2007 2:43 PM