Technical data

Contents
6000 Series Oscilloscopes Service Guide 7
To check the 6000A Series or 6000L Series system board 96
To check the 6000A Series display 97
To check the 6000L Series display output 97
To check the fan 98
To run the internal self-tests 99
To verify default setup 99
5 Replacing 6000A Assemblies 101
To remove the cabinet 104
To remove the handle 105
To remove the storage lid 106
To remove the front panel assembly 107
To remove the keyboard assembly 110
To remove the display assembly 113
To remove the backlight inverter board and e-field shield 117
To remove the LCD, gasket, and protective lens from the display
mount 122
To remove the power supply shield 125
To remove the power supply 129
To remove the power shaft 130
To remove the AC input board 131
To remove the batteries (Option BAT only) 133
To remove the battery controller board (Option BAT only) 135
To remove the fan 137
To remove the system board 139
6 Replacing 6000L Assemblies 143
To remove the bottom cover 145
6000_series_service_guide.book Page 7 Friday, March 23, 2007 2:43 PM