Technical data

Testing Performance 2
6000 Series Oscilloscopes Service Guide 39
Conventions
The following conventions will be used when referring to
oscilloscope models throughout this chapter.
Fluke MET/CAL Procedures
Fluke MET/CAL procedures are available for the
6000A Series oscilloscopes.
The MET/CAL badge with "PROCEDURES AVAILABLE"
signifies that Fluke has created Warranted MET/CAL
procedures to verify the performance of this instrument
using MET/CAL metrology software. These procedures can be
obtained from Fluke. Please see http://www.fluke.com and
search for MET/CAL for more information.
Table 3 Conventions
Models Referred to as:
MSO/DSO6012A, MSO/DSO6014A, DSO6014L 100 MHz Models
MSO/DSO6032A, MSO/DSO6034A 300 MHz Models
MSO/DSO6052A, MSO/DSO6054A, DSO6054L 500 MHz Models
MSO/DSO6102A, MSO/DSO6104A, DSO6104L 1 GHz Models
NOTE
Please Note: Agilent Technologies, Inc. provides this link for the
convenience of its customers and does not warrant the suitability or
performance of the software.
6000_series_service_guide.book Page 39 Friday, March 23, 2007 2:43 PM