Technical data

16 6000 Series Oscilloscopes Service Guide
1 Characteristics and Specifications
6000A Series and 6000L Series Environmental Conditions
Overvoltage Category
This product is intended to be powered by MAINS that
comply to Overvoltage Category II, which is typical of
cord-and- plug connected equipment.
Pollution Degree
The 6000 Series Oscilloscope may be operated in
environments of Pollution Degree 2 (or Pollution Degree 1).
Pollution Degree Definitions
Pollution Degree 1: No pollution or only dry, non- conductive
pollution occurs. The pollution has no influence. Example: A
clean room or climate controlled office environment.
Pollution Degree 2. Normally only dry non- conductive
pollution occurs. Occasionally a temporary conductivity
caused by condensation may occur. Example: General indoor
environment.
Pollution Degree 3: Conductive pollution occurs, or dry,
non- conductive pollution occurs which becomes conductive
due to condensation which is expected. Example: Sheltered
outdoor environment.
6000_series_service_guide.book Page 16 Friday, March 23, 2007 2:43 PM