Technical data

Replacing 6000L Assemblies 6
6000 Series Oscilloscopes Service Guide 145
To remove the bottom cover
1 Turn off the oscilloscope and disconnect the power cable.
2 Turn the oscilloscope so the bottom is facing up.
3 Using a T10 screwdriver, remove 5 screws from the rear
and sides of the cabinet.
4 Slide the bottom cover back and up to remove.
Figure 48 Removing the cover
T-10 Screws
T-10 Screw
T-10 Screw
6000_series_service_guide.book Page 145 Friday, March 23, 2007 2:43 PM