Technical data

Replacing 6000A Assemblies 5
6000 Series Oscilloscopes Service Guide 131
To remove the AC input board
1 Perform the previous procedures:
• “To remove the cabinet” on page 104
• “To remove the power supply shield” on page 125
• “To remove the power shaft” on page 130
2 Disconnect the black power supply cable and the AC input
cable.
3 Remove the T15 screw securing the input board to the
deck.
4 Slide the board to the right to release it from the 2 posts.
5 Remove the board.
Figure 41 Removing the AC input board
AC Input Cable
Black
Power
Supply
Cable
Posts (2)
T15 Screw
AC Input Board
Keyholes (2)
6000_series_service_guide.book Page 131 Friday, March 23, 2007 2:43 PM