Technical data

Replacing 6000A Assemblies 5
6000 Series Oscilloscopes Service Guide 125
To remove the power supply shield
1 Perform the previous procedures:
“To remove the cabinet” on page 104
2 Pull the shield back to release the 4 side hook legs from
the deck.
Figure 34 Release hook legs from deck.
WARNING
Thin sheet metal parts may have sharp edges. Handle with care to avoid injury.
Hook legs
Hook leg
Hook leg
Slot in deck
Pull back
Pull back
6000_series_service_guide.book Page 125 Friday, March 23, 2007 2:43 PM