Technical data

114 6000 Series Oscilloscopes Service Guide
5 Replacing 6000A Assemblies
Figure 24 Removing the main shield and disconnecting the display ca-
bles
4 Using a flat- blade screwdriver, lift the latch tab at the
bottom of the display assembly just enough to clear the
slot in the deck.
5 Push the entire display assembly to the right to release
the retaining hooks from their slots in the deck
6 Lift and remove the display assembly.
Main Shield
Display (LCD) Cable
System Board
Backlight Inverter Cable
6000_series_service_guide.book Page 114 Friday, March 23, 2007 2:43 PM