Technical data

Replacing 6000A Assemblies 5
6000 Series Oscilloscopes Service Guide 111
Figure 23 Removing the keyboard assembly
6 When reinstalling the boards:
a If you have a new main board assembly, you will need
to separate the softkey board from the main keypad
board.
Using a needle nose pliers, carefully remove the two
process tabs.
Latches (8)
Main Keypad Board
Notch
Ribbon Cable
Softkey Board
Retaining Tabs
and Slots
Front Panel
Encoder
6000_series_service_guide.book Page 111 Friday, March 23, 2007 2:43 PM