Service manual

Replaceable Parts

Introduction

Table 5-4 lists the electrical components and Table 5-5 lists the mechanical components for the Agilent 6050A/6051A

Electronic Load Mainframes. These tables provide the following information:

• Reference designation (see Table 5-1)

• Agilent part number

• Description of part (see Table 5-2)

• Manufacturer's Federal Supply Code number (see Table 5-3 for manufacturer's name and address)

• Manufacturer's part number

Refer to Figure 5-1 and 5-2 for component locations.

How To Order Parts

You can order parts from your local Agilent Technologies sales office. (Refer to the list at the end of this manual for the

office nearest you.) When ordering parts, include the following information:

• Agilent part number

• Description of the part

• Quantity desired

• Electronic Load model number (Agilent 6050A)

If the part is not manufactured by Agilent Technologies and the manufacturer's part number is listed, you may order it

directly from them. Locate the manufacturer' s Federal Supply Code and refer to Table 5-3.

Table 5-1. Reference Designators

A Assembly RTB Removable Terminal Block

B Blower RTP Removable Jumper

C Capacitor S Switch

D Diode T Transformer

F Fuse TB Terminal Block

J Terminal Jack TP Test Pin

MP Mechanical Part U Integrated Circuit

P Terminal Plug VR Voltage Regulator

Q Transistor W Cable Assembly

RT Thermal Resistor Y Oscillator