Operating instructions

Language Dictionary
80
Table 4-1. Summary of Commands and Parameters
(For numerical parameters, refer to the Operating Manual of the specific electronic load model.)
Command Parameters Command Parameters Type
1
Common Commands
*CLS
(none)
*RCL (space)<NRf>
CI
*ESE (space)<NRf> *RDT?
(none)
*ESE?
(none)
*RST?
(none)
*ESR?
(none)
*SAV (space)<NRf>
*IDN?
(none)
*SRE (space)<NRf>
*OPC
(none)
*SRE??
(none)
*OPC?
(none)
*STB?
(none)
*OPT?
(none)
*TRG
(none)
*PSC (space)<NRf> *TST?
(none)
*PSC?
(none)
*WAI
(none)
Command Parameters Type
1
Root-Level Commands
ABOR
(none) CI
CHAN[:LOAD] (space)<NRf+>
CI
CHAN[:LOAD]? (none) or (space)MIN or (space)MAX
NOTE: INST may be used as an alias for CHAN
CURR[:LEV][:IMM] (space)<NRf+>[suffix]
CS
CURR[:LEV][:IMM]? (none) or (space)MIN or (space)MAX
CURR[:LEV]TRIG (space)<NRf+>[suffix]
CURR[:LEV]TRIG? (none) or (space)MIN or (space)MAX
CURR[:PROT][:LEV] (space)<NRf+>[suffix]
CURR[:PROT][:LEV]? (none) or (space)MIN or (space)MAX
CURR:PROT:DEL (space)<NRf+>[suffix]
CURR:PROT:DEL? (none) or (space)MIN or (space)MAX
CURR:PROT:STAT (space)OFF or 0;(space)ON or 1
CURR:PROT:STAT?
(none)
CURR:RANG (space)<NRf+>[suffix]
CURR:RANG? (none) or (space)MIN or (space)MAX
CURR:SLEW (space)<NRf+>[suffix]
CURR:SLEW? (none) or (space)MIN or (space)MAX
CURR:TLEV (space)<NRf+>[suffix]
CURR:TLEV? (none) or (space)MIN or (space)MAX
INP:PROT:CLE
(none) CS
INP:SHOR[:STAT] (space)OFF or 0;(space)ON or 1
INP:SHOR[:STAT]?
(none)
INP[:STAT] (space)OFF or 0;(space)ON or 1
INP[:STAT]?
(none)
NOTE: OUTP may be used as an alias for INP
MEAS:CURR[:DC]
(none) CS
MEAS:POW[:DC]
(none)
MEAS:VOLT[:DC]
(none)
MODE:CURR[:DC]
(none) CS
MODE:RES
(none)
MODE:VOLT[:DC]
(none)
MODE?
(none)
NOTE: FUNC may be used as an alias for MODE
PORT0 (space)OFF or 0 (space)ON or 1
CS