Operating instructions

Language Dictionary
49
INPut Subsystem Channel-Specific Input Programming Functions
Description
This subsystem has commands for:
■ Turning the electronic load input on or off.
■ Placing a short across the electronic load input.
■ Clearing any input software protection circuits that have been set.
For multiple electronic loads these commands function only on the presently specified
channel.
Keywords
Command
INPut[:STATe] ON|l
INPut[:STATe] OFF|0
INPut:PROTection:CLEar
INPut:SHORt[:STATe]:ON|l
INPut:SHORt[:STATe]:OFF|0
Function
Turn electronic load input circuit ON.
Turn electronic load input circuit OFF.
Reset input protection circuits.
Place short across electronic load input.
Remove short from electronic load input.
Alternate Syntax
OUTPut can be used as an alias for INPut.
Related Subsystems
CURRent RESistance VOLTage
Syntax Diagram
Input Subsystem Syntax Diagram