Operating instructions

Language Dictionary
32
*ESE Standard Event Status Enable Command/Query
Type
Device Status
Description
This command sets the condition of the Standard Event Status Enable register, which
determines which events of the Standard Event Status Event register (see *ESR?) are
allowed to set the ESB (Event Summary Bit) of the Status Byte register. A "1" in the bit
position enables the corresponding event. All of the enabled events of the Standard Event
Status Event register are logically ORed to cause the ESB (bit 5) of the Status Byte
register to be set. See Chapter 5 - Status Reporting for descriptions of all three registers.
Command Syntax
*ESE <NRf>
Parameters
0 to 255
Suffix
None
Example
*ESE 129 Enables the OPC and PON events of the Standard Event Status Event
register.
Query Syntax
*ESE?
Returned Parameters
<NR1> Value: 0 to 255
Related Commands
*PSC *STB?
*ESR? Standard Event Status Register Query
Type
Device Status
Description
This query reads the Standard Event Status Event register. Reading the register clears it.
See Chapter 5 - Status Reporting for a detailed explanation of this register.
Standard Event Status Event Register
Bit Position
76543210
Bit Name
PON 0 CME EXE DDE QYE 0 OPC
Bit Weight
1286432168421
Query Syntax
*ESR?
Returned Parameters
<NR1> Value: 0 to 255
Suffix
None
Related Commands
*OPC *CLS