OPERATING MANUAL 603xA FAMILY AUTORANGING SYSTEM DC POWER SUPPLIES 6030A, 6031A, 6032A, 6035A, 6033A, 60380A 6010A, 6011A, 6012B, 6015A, 6023A, 6028A

Standard Commands for Programmable Instruments (SCPI)
112
Command Summary (continued)
Subsystem Commands
Command Parameters
OUTP[:STAT] <space>{0|OFF}[,NOR] <space>{l|ON}[,NOR]
OUTP? (none)
OUTP:PROT:CLE (none)
OUTP:PROT:DEL < space > < NR1 > or < space > MIN or < space > MAX
ABOR (none)
OUTP:PROT:DEL? (none) or <space>MlN or <space>MAX
OUTP:REL:POL <space>NORM or <space>REV
OUTP:REL:POL? (none)
OUTP:REL[:STAT] <space>0 or OFF <space>1 or ON
OUTP:REL:? (none)
STAT:OPER:COND? (none)
STAT:OPER:ENAB <space> <NRf>
STAT:OPER:ENAB? (none)
STAT:OPER[:EVEN]? (none)
STAT:OPER:NTR < space > < NRf >
STAT:OPER:NTR? (none)
STAT:OPER:PTR < space > < NRf >
STAT:OPER:PTR? (none)
STAT:PRES (none)
STAT:QUES:COND? (none)
STAT:QUES:ENAB < space > < NRf >
STAT:QUES:ENAB? (none)
STAT:QUESL:EVEN]? (none)
TRIG[:IMM] (none)
TRIG:SOUR < space > BUS
TRIG:SOUR? (none)
[SOUR]:VOLT[:LEV][:IMM][:AMPL] <space> <NRf+ >[suffix]
[SOUR]:VOLT? (None) or <space>MlN or <space>MAX
[SOUR]:VOLT[:LEV]:TRIG[:AMPL] <space> <NRf+ >[suffix]
[SOUR]:VOLT[:LEV]:TRIG? (None) or <space>MlN or <space>MAX
[SOURl:VOLT:PROT[:AMPLl? (None)
Common Commands
Command Parameters Command Parameters
*CLS (None) *RCL < space > < NRf >
*ESE <space> <NRf> *RST (None)
*ESE? (None) *SAV < space > < NRf >
*ESR? (None) *SRE < space > < NRf >
*IDN? (None) *SRE? (None)
*OPC (None) *STB? (None)
*OPC? (None) *TRG (None)
*PSC < space > < bool > *TST? (None)
*PSC? (None) *WAI (None)