Service manual

88
Table 5-3. Replaceable Parts List (continued)
Ref. Desig. Agilent Model Agilent Part Number Description
A8 Mechanical
both 1205-0564 heat sink (U33)
both 5001-6732 GPIB mounting plate
Chassis Electrical
B1 both 3160-0343 fan
S1 both 3101-0402 switch, DPST (on/off)
FL1 both 9135-0223 ac line filter
F1 both 2110-0383 fuse, 8AT, 250V
W1 both 8120-4355 cable, ribbon (A3 to A8)
W2 both 8120-4352 cable, 3-pin (A1 to A8)
W3 both 8120-4351 cable, 5-pin (A1 to A3)
W5,6 both 8120-4356 cable, ribbon (A2 to A8)
Chassis Mechanical
both 06023-00016 chassis
both 5021-8417 front frame casting
both 06033-00010 front sub-panel
6033A 06033-00013 front panel, screened
6038A 06038-00015 front panel, screened
both 06023-00024 rear panel
both 1510-0044 binding post (rear panel ground)
both 2110-0564 fuseholder body
both 2110-0565 fuseholder cap
both 2110-0569 fuseholder nut
both 3160-0309 finger guard (fan)
both 06023-00023 bracket, upper (lettered)
both 0403-0282 bumper feet (on upper bracket)
both 06033-00002 bracket, lower (A8 board)
both 5041-8803 top trim strip
both 5001-0540 side trim strip (2)
both 01650-47401 knob (RPG adjust)
both 5041-0309 plain key cap (4)
both 5041-2089 lettered key cap (LCL)
both 7120-1254 LOGO
both 4040-1954 display window
both 06023-00020 cover, top
both 06023-00022 cover, bottom
both 06023-00009 cover, terminal block
6033A 0360-2191 cover, dc output
6038A 1540-1626 cover, dc output
both 5062-3703 strap handle
both 5041-8819 handle retainer, front
both 5041-8820 handle retainer, back
both 5041-8801 foot (4)