Operator`s manual

46 100 Operator’s Manual
5 Troubleshooting and Maintenance
Printer Self Test
You can test the print head and ribbon only after inserting paper. Do not
attempt to print without paper. Follow these steps to perform a printer
self test:
1 Turn off the 100.
2 Press and hold the printer toggle switch in the Paper feed position.
3 Turn on the 100.
4 Hold the printer toggle switch until printing begins. The printer
prints a list of the current configuration settings and performs a
continuous print test.
5 Press the printer toggle switch to the OnLine / Off Line position to
stop the printing operation.
6 The printer is ready to resume normal operation.