Operator`s manual

34 100 Operator’s Manual
4 Operating the 100
6 Press RUN PROG. The programmed sequence displays in the
Position 3 screen. If correct, press ENTER. The program begins.
To stop any individual basket during multi-basket operation, press
STOP # (where # is the basket number you want to stop). To stop all
baskets at the same time, press STOP in the lower right corner of the
keypad.
Three-Basket Operation
To run all three baskets together, starting and stopping at the same times,
complete the following steps:
1 Press RUN MANUAL. The previously set test length (if any) for
three-basket operation flashes in the Position 3 screen.
2 Press ENTER to accept the displayed values or enter a new test
length in hhmmss format and press ENTER. All three baskets lower
and begin dipping. The baskets stop simultaneously, lifting
automatically at the end of the programmed time period.
Printer Operation During Manual or Program Operation
(Optional)
If your 100 is equipped with the optional Report Center Printer, you can
generate a printout of the instrument status at any time by pressing
PRINT. This does not affect automatic printing as set by the PRINT
FREQ function.
NOTE
When an individual basket is stopped and the other baskets are dipping,
the individual basket can only be restarted in the independent
single-basket mode. It cannot be restarted as part of the running
program.
NOTE
Press STOP to stop all three baskets at any time during the test.