Operator`s manual

30 100 Operator’s Manual
4 Operating the 100
Placing Dosage Units in the Baskets
Place one dosage unit in each of the six tubes of the basket. USP fluted
disks may be added where specified in the individual monograph.
Selecting Operating Mode
You can select single-basket, multi-basket, or three-basket operation.
Single-basket Operation
In single-basket mode, the operation of each basket is set independent of
the others. To start a single basket:
1 Press RUN # (where # is the basket number you want to run). The
current test time for that position, if any, flashes. For example, the
following display indicates that the basket in the selected position is
currently programmed to dip for 10 minutes:
2 To accept the current test length, press ENTER. The basket lowers
and begins dipping, lifting automatically at the end of the
programmed time period.
To enter a different dip time value, enter the new value in hhmmss
format and press ENTER to start the dip cycle.
3 To stop the dip cycle of a basket before the end of the programmed
time, press STOP # (where # is the basket number you want to stop).
NOTE
The Position 3 screen is the display screen for all programming
regardless of which position or parameter you are programming.
001000
POSITION 3