Operator`s manual
18 100 Operator’s Manual
3 Setting Up the 100
Unpacking Your 100
1 Open each carton and check the contents for damage which may
have occurred during shipping. Shipping damage rarely occurs, but if
it does contact both the carrier who delivered the instruments and the
Dissolution Systems Service Department. Though claims for damage
should be filed with the carrier, we can help you file a claim.
2 Carefully remove the 100 from its shipping carton. Hold the unit
firmly to prevent it from dropping.
3 Check for items which may have come loose during shipping. Be
sure to remove all parts before discarding or storing the packaging.
4 Place the unit on a clean, dry, level section of the bench top or table.
At least four inches of space should be open for the rear panel power
connections and for access to the rear panel power switch.
WARNING
Hold the unit only by the base. Do not hold by the reciprocating
shafts to avoid damage.
WARNING
The electrical connection at the back of the apparatus is the
primary disconnect for the instrument. The apparatus should be
positioned to allow accessibility to the power cords for easy
disconnection.