Technical data

41
Ordering Information
Opt 200 174 to 220 Vac, 47 to 63 Hz
(Japan only)
Opt 230 191 to 250 Vac, 47 to 63 Hz
* Opt 908 Rack-mount Kit (p/n 5062-3977)
* Opt 909 Rack-mount Kit w/handles
(p/n 5063-9221)
Opt 0L2 Extra Standard
Documentation Package
Opt 0B3 Service Manual
Opt 0B0 No documentation package
* Support rails required
Accessories
p/n 1494-0059 Accessory Slide Kit
p/n 1252-3698 7-pin Analog Plug
p/n 1252-1488 4-pin Digital Plug
p/n 5080-2148 Serial Link Cable
2 m (6.6 ft)
E3663AC Support rails for
Agilent rack cabinets
Single-Output: 2000 W GPIB (Continued)
Specifications
(at 0
˚
to 55
˚
C unless
otherwise specified)
6673A- 6674A- 6674A- 6675A- 6675A-
J08 J03 J07 J04 J06
Special Order Special Order Special Order Special Order Special Order
Option Option Option Option Option
Number of outputs 11111
GPIB Yes Yes Yes Ye s Yes
Output ratings
Output voltage 40 V 56 V 50 V 160 V 135 V
Output current 50 A 38 A 42 A 13 A 16 A
Programming accuracy at 25
˚
C ±5
˚
C
Voltage 0.04%+ 40 mV 60 mV 60 mV 160 mV 125 mV
Current 0.1%+ 35 mA 28 mA 30 mA 10 mA 12 mA
Ripple and noise
from 20 Hz to 20 MHz
Voltage rms 1 mV 1.25 mV 1.25 mV 2.8 mV 2 mV
Voltge peak to peak 10.5 mV 11 mV 11 mV 20 mV 18 mV
Current rms 40 mA 28 mA 25 mA 18 mA 12 mA
Readback accuracy at 25˚C ±5˚C
(percent of reading plus fixed)
System models only
Voltage 0.05%+ 60 mV 90 mV 90 mV 240 mV 185 mV
±Current 0.1%+ 60 mA 38 mA 42 mA 14 mA 18 mA
Load regulation
Voltage 0.002%+ 1.4 mV 2 mV 2 mV 6 mV 4 mV
Line regulation
Current 0.005%+ 4 mA 2 mA 2 mA 1 mA 4 mV
Transient response time Less than 900 µs for the output voltage to recover 100 mV following a
change in load from 100% to 50% or 50% to 100% of the output current
rating of the supply
Supplemental Characteristics (Non-warranted characteristics determined by design and
useful in applying the product)
Average resolution
Voltage 10.5 mV 14 mV 12 mV 40 mV 34 mV
Current 12.5 mA 9.5 mA 11 mA 3.25 mA 4 mA
OVP 75 mV 100 mV 85 mV 300 mV 242 mV
Output Voltage programming
response time*
(excluding command 130 ms 130 ms 130 ms 280 ms 250 ms
programming processing time)
*Full load programming rise/fall time (10% to 90% or 90% to 10%) with full resistive load equal to rated output
voltage/rated output current.
Power Products Catalog 2002-2003 For more detailed specifications see the product manual at www.agilent.com/find/power
Agilent Performance dc Power Supplies speed and accuracy for test optimization