Technical data

35
Ordering Information
Opt 100 87 to 106 Vac, 47 to 63 Hz
Opt 120 104 to 127 Vac, 47 to 63 Hz
Opt 220 191 to 233 Vac, 47 to 63 Hz
Opt 240 209 to 250 Vac, 47 to 63 Hz
* Opt 908 Rack-mount Kit
(p/n 5062-3977)
* Opt 909 Rack-mount Kit
w/ Handles (p/n 5063-9221)
Opt 0L2 Extra Standard
Documentation Package
Opt 0B3 Service Manual
Opt 0B0 No documentation package
*Support rails required
Accessories
p/n 1494-0059 Accessory Slide Kit
p/n 1252-3698 7-pin Analog Plug
p/n 1252-1488 4-pin Digital Plug
p/n 5080-2148 Serial Link
Cable 2 m (6.6 ft)
E3663AC Support rails for
Agilent rack cabinets
Single-Output: 500 W GPIB (Continued)
Specifications
(at 0
˚
to 55
˚
C unless
otherwise specified)
6654A- 6654A- 6654A- 6655A- 6655A-
J04 J05 J12 J05 J10
Special Order Special Order Special Order Special Order Special Order
Option Option Option Option Option
Number of outputs 11111
GPIB Yes Yes Yes Yes Yes
Output ratings
Output voltage 70 V 50 V 80 V 150 V 156 V
Output current (40
˚
C) 7.5 A 10 A 6 A 3.2 A 3 A
Maximum current (50
˚
C/55
˚
C) 6.75 A/6.37 A 9 A/8.5 A 5.4 A/5.1 A 2.88 A/2.72 A 2.7 A/2.55 A
Programming accuracy at 25
˚
C ±5
˚
C
Voltage 0.06% + 30 mV 26 mV 35 mV 64 mV 71 mV
Current 0.15% + 7 mA 9 mA 7 mA 3.5 mA 4 mA
Ripple and noise
from 20 Hz to 20 MHz
Voltage rms 600 µV 500 µV 700 µV 800 µV 900 µV
peak-peak 6 mV 5 mV 7 mV 8 mV 8 mV
Current rms 5 mA 4 mA 3 mA 2 mA 3 mA
Readback accuracy at 25˚C ±5˚C
(percent of reading plus fixed)
System models only
Voltage 0.07% + 50 mV 40 mV 58 mV 100 mV 110 mV
+Current 0.15% + 6 mA 8 mA 6 mA 2.5 mA 3 mA
–Current 0.35% + 13 mA 17 mA 16 mA 6.5 mA 7.5 mA
Load regulation
Voltage 4 mV 4 mV 4 mV 6 mV 7 mV
Current 0.5 mA 0.5 mA 0.5 mA 0.5 mA 1 mA
Line regulation
Voltage 1 mV 1 mV 4.5 mV 2 mV 2 mV
Current 0.5 mA 0.5 mA 0.5 mA 0.5 mA 1 mA
Transient response time Less than 100 µs for the output voltage to recover to its previous level
(within 0.1% of the voltage rating of the supply or 20 mV, whichever is greater)
following any step change in load current of up to 50% of rated current
Supplemental Characteristics (Non-warranted characteristics determined by design and
useful in applying the product)
Average resolution
Voltage 17.5 mV 15 mV 20 mV 37.5 mV 39.5 mV
Current 1.9 mA 2.75 mA 1.7 mA 8 mA 8 mA
OVP 110 mV 93 mV 130 mV 240 mV 250 mV
OVP accuracy 1.4 V 1.2 V 1.6 V 3 V 3.3 V
Power Products Catalog 2002-2003 For more detailed specifications see the product manual at www.agilent.com/find/power
Agilent Performance dc Power Supplies speed and accuracy for test optimization