Technical data

These linear-regulated dc power
supplies provide reliable and conve-
nient dc power on a lab bench. The
10-turn pots and clear voltage and
current meters allow fine adjust-
ments to be made easily. These
models are CV/CC, so they can
serve as either voltage or current
sources. The “CC Set” button allows
the current setting to be viewed,
allowing easy adjustment of a
current limit. Either the positive or
negative terminal may be connected
to ground, creating a positive or
negative voltage, or floated up to
240 V from ground.
E3610A, E3611A, E3612A
These flexible 30 watt dc power
supplies have 2 ranges, providing
more current at lower voltage levels.
E3614A, E3615A, E3616A, E3617A
These dc power supplies have
many features normally available
only in performance power supplies.
Remote sensing eliminates the
errors in voltage regulation due
to voltage drops in the load leads.
Delicate loads are protected by
the overvoltage protection feature.
Remote voltage signals can be used
to control the power supply’s output
voltage and current levels.
Agilent Basic dc Power Supplies essential features for a tight budget
Specifications
(at 0
˚
to 55
˚
C unless
otherwise specified)
Power Products Catalog 2002-2003 For more detailed specifications see the product manual at www.agilent.com/find/power
16
Convenient size for bench use
Low noise and excellent regulation
Easy to use
E3610A-E3617A
Single-Output: 30-60 W
E3610A E3611A E3612A E3614A
Number of output ranges 222 1
GPIB No No No No
Output ratings
1
Range 1 0 to 8 V, 0 to 20 V, 0 to 60 V, 0 to 8 V,
0 to 3 A
1
0 to 1.5 A
1
0 to 0.5 A
1
0 to 6 A
Range 2 0 to 15 V, 0 to 35 V, 0 to 120 V, —
0 to 2 A
1
0 to 0.85 A
1
0 to 0.25 A
1
Power (max) 30 W 30 W 30 W 48 W
Load and line regulation 0.01% + 2 mV 0.01% + 2 mV 0.01% + 2 mV 0.01% + 2 mV
Ripple and noise
from 20 Hz to 20 MHz
Voltage rms 200 µV 200 µV 200 µV 200 µV
peak-peak 2 mV 2 mV 2 mV 1 mV
Supplemental Characteristics (Non-warranted characteristics determined by design and
useful in applying the product)
Control mode CV/CC CV/CC CV/CC CV/CC
Meter resolution Voltage 10 mV 100 mV 100 mV 10 mV
(minimum change Current 10 mA 10 mA 1 mA 10 mA
using front-panel
controls)
For 0ff-the-shelf shipment
1
Maximum current is derated 1% per °C between 40° to 55°C.