Technical data

Agilent Technologies
Feature Description
Index
(Continued)
6030 Series Autorangers
6610 & 6630 Series Single-Output
6620 Series Multiple-Output
6620 Series Precision Multiple-Output
6640 & 6650 Series Single-Output
6670-6690 Series Single-Output
66000 Modular Power Systems
66300 Series Mobile Communications
E3630 & E3640 Series Single & Multiple-Output
N3280A Precision Multiple-Output
Power Products Catalog 2002-2003 For more detailed specifications see the product manual at www.agilent.com/find/power
13
dc Range Max 200 W - 40 W - 40 W & 25 W & 200 W - 2000 W - 1200 W 40 W- 30 W - 5 W
Power 1000 W 100 W 80 W 50 W 500 W 6600 W 100 W 200 W
Max Voltage 500 V 100 V 50 V 50 V 120 V 120 V 200 V 20 V 60 V 10 V
Max Current 120 A 10 A 10 A 2 A 50 A 875 A 16 A 5 A 20 A 0.5 A
Page 53 25, 27 55 57 29, 33 39, 48, 50 59 63 18, 22 71
GPIB Programming Features
GPIB programming of voltage and current
••••••••••
Self-documenting programming commands
mean that programming is done in units
of volts and amps, not in percentages or
binary representations.
Measured voltage and current
••••••••••
read-back over the GPIB
The output is read back in
units of volts and amps.
Store-recall states
•
Complete operating states can be stored
in nonvolatile memory. Each state specifies
not only the output voltage and current,
but also many of the programmable
protection features.
Number nonvolatile states 0 4 0 4 5 6670-5 5 4 5 0
(One of these states is automatically 6680-4
accessed on turn-on) 6690-4
Number volatile states 16/5 0 10 7 0 0 5 0 0 0
Standard Commands for Programmable
•• ••••••
Instruments (SCPI)
SCPI is the standard language for test and
measurement equipment. Standard codes
make a software writing and maintenance
more efficient. For example, using this
standard, the output voltage of the power
supply is measured with the same command
(MEASURE: VOLTAGE?) by either a DMM
or a power supply.
Protection Features
•
GPIB programmable overvoltage protection M
•
T T
••
T
•••
Can be enabled to quickly down-program
the output and set SRQ and/or DFI/RI.
T = Can generate trigger.
M = Overvoltage, the level is set manually
with a front-panel control.
GPIB programmable overcurrent protection
••••••
T
•
E3630
•
Can be enabled to quickly down-program only
the output and set SRQ and/or DFI/RI.
T = Can generate trigger.
Overtemperature protection
••••••
T
••
Will down-program the output and can
be enabled to set SRQ and/or DFI.
T = Can generate trigger.