User`s guide

3 Sample Sessions: Measuring a Trace How to Print the Measurement

100 E6000C Mini-OTDR User’s Guide, E0302

Figure 32 Trace with an End set at Marker A

If you add an Event after the End (<A

DD REFL. EVENT> or

DD NON-REFL. EVENT> from the [EVENTS] menu), the

End is removed, and its Event reverts to its original type.

How to Print the Measurement

This example demonstrates how to print the results of a

measurement.

NOTE You may need to configure your printer before you can

print a trace. See “How to Set up the Printer

Configuration” on page 141.

Color printers Please note that the E6000C Mini-OTDR only supports

monochrome printouts. This means that some printers

will only work with a black ink cartridge installed, even if

these printers support a color ink cartridge.