Data Sheet

Software applications

FPGA dynamic probe application (N5406A for Xilinx, N5434A for Altera)

Give your MSO internal FPGA visibility. Agilent’s MSO FPGA dynamic probe provides internal

FPGA visibility and quick instrument setup using an innovative core-assisted debug approach.

Measurement tasks that previously took hours can be done in a few mouse clicks. In a few

seconds, easily measure a different set of internal signals without changing your FPGA design.

This application works with all MSO models.

For more information:

www.agilent.com/ﬁ nd/6000-altera

www.agilent.com/ﬁ nd/6000-xilinx

Power application (U1881A)

Need to make power measurements with your scope? Agilent’s power application provides a

full suite of power measurements that run on a PC connected to an Inﬁ niiVision 6000 Series

oscilloscope. Make more accurate power supply efﬁ ciency measurements by using an U1880A

deskew ﬁ xture to deskew your voltage and current probes.

This application works with all DSO and MSO models.

For more information: www.agilent.com/ﬁ nd/power-app

Vector signal analysis software (89601A)

Expand the measurement capability of your scope with the 89601A vector signal analysis soft-

ware. This advanced DSP based software takes the digitized signal data provided by the scope

and provides FFT based spectrum analysis and wide bandwidth digital modulation analysis for

wireless communication signals like WCDMA and cdma2000, and wireless networking signals

like 802.11 WiFi and 802.16 WiMax

Take advantage of the super wide bandwidth of your scope to capture and evaluate radar

signals.

For more information: www.agilent.com/ﬁ nd/6000-vsa

Segmented memory (N5454A or Option SGM on new scope purchases)

Segmented memory optimizes available memory for data streams that have long dead times

between activity. The application excels at analyzing signal activity associated with laser pulses,

serial buses, and bursty signals such as radar. View an overlay of all signal segments, including

MSO channels and serial decode, while highlighting the current segment. Quickly move between

segments to view signal detail associated with a speciﬁ c segment.

This application works with all DSO and MSO models.

For more information: www.agilent.com/ﬁ nd/segmented

Debug and validate your FPGA designs

faster and more effectively with the FPGA

dynamic probe and an Agilent MSO.

Expand the capability of your scope with

89601A vector analysis software.

Use segmented memory to optimize

available memory.

Use your scope to quickly make and

analyze power measurements.