Specifications

8 Hardware Installation
1 General Information
Introduction
This document provides installation instructions for the Agilent Technologies
5975 Series Mass Selective Detector (MSD). Installation must be performed by
an Agilent Technologies service representative.
The Agilent Technologies 5975 Series Mass Selective Detectors (MSDs) are
diffusion and turbo pump MSDs.
The 5975 Series MSD system consists of:
• 5975 Series MSD
• Optional G3397A High Vacuum Gauge controller (required for CI operation)
• Gas Chromatograph Series
6890 and 6850 Series GC, with options for MSD use
7890A Series GC, with options for MSD use
7820A Series GC, predefined bundles for the MSD use
• ALS Autosamplers
7683 Series Automatic Liquid Sampler
7693 Series Automatic Liquid Sampler
• Computer and MSD ChemStation software
Refer to your MSD ChemStation documentation for additional information
Table 1 lists possible configurations for the 5975 Series MSD. Figure 1
identifies many of the common parts.
NOTE
Mix and match of the combinations below may not be supported.