Specifications

Checklists 3
Hardware Installation 47
 Shipment damaged or incomplete:
GC installation
The following steps are general, and may differ slightly depending upon the
series of GC used.
 GC placed on an appropriate bench
 Upper front knockout in the interior oven wall removed
 The two large plastic knockouts removed from the left side panel
 Left side panel reinstalled; GC/MSD interface cable routed through the rear
hole
Connecting helium lines to the GC
 Carrier gas supply plumbed with copper tubing
 Plumbing purged with helium at 35 to 55 kPa (5 to 8 psi) for 5 to 10 minutes
 Gas purifier plumbed and purged
Distribution center notified (date):
Damaged or missing material:
Person contacted:
DM notified (date):