Installation manual

64 5975 Series MSD Operation Manual
3 Operating in Electron Impact (EI) Mode
To view MSD analyzer temperature and vacuum status
You can also use the Local Control Panel to perform this task. See the
G1701EA GC/MSD ChemStation Getting Started manual for more
information.
Procedure
1 In Instrument Control view, select Edit Tune Parameters from the Instrument
menu (Figure 13).
2 Select the tune file you plan to use with your method from the Load MS Tune
File dialog box.
3 Analyzer temperatures and vacuum status are displayed in the Zones field.
Figure 13 Tune parameters