Installation manual

5975 Series MSD Operation Manual 6
Operating the MSD from the LCP 51
Modes of operation 51
LCP Status Messages 53
ChemStation Loading <timestamp> 53
Executing <type>tune 53
Instrument Available <timestamp> 53
Loading Method <method name> 53
Loading MSD Firmware 53
Loading OS 54
<method> Complete <timestamp> 54
Method Loaded <method name> 54
MS locked by <computer name> 54
Press Sideplate 54
Run: <method> Acquiring <datafile> 54
To view system status during startup 54
LCP Menus 55
The EI GC/MSD Interface 58
Before You Turn On the MSD 60
Pumping Down 61
Controlling Temperatures 61
Controlling Column Flow 62
Venting the MSD 63
To view MSD analyzer temperature and vacuum status 64
To set monitors for MSD temperature and vacuum status 66
To set the MSD analyzer temperatures 67
To set the GC/MSD interface temperature from the
ChemStation 69
To monitor high vacuum pressure 71