Installation manual

49
Agilent 5975 Series MSD
Operation Manual
Agilent Technologies
3
Operating in Electron Impact (EI) Mode
Operating the MSD from the Data System 51
Operating the MSD from the LCP 51
LCP Status Messages 53
LCP Menus 55
The EI GC/MSD Interface 58
Before You Turn On the MSD 60
Pumping Down 61
Controlling Temperatures 61
Controlling Column Flow 62
Venting the MSD 63
To view MSD analyzer temperature and vacuum status 64
To set monitors for MSD temperature and vacuum status 66
To set the MSD analyzer temperatures 67
To set the GC/MSD interface temperature from the ChemStation 69
To monitor high vacuum pressure 71
To measure column flow linear velocity 73
To confirm column flow 74
To tune the MSD 75
To verify system performance 76
High-Mass Testing (5975 Series MSDs) 77
To remove the MSD covers 80
To vent the MSD 82
To open the analyzer chamber 84
To close the analyzer chamber 87
To pump down the MSD 91
To move or store the MSD 93
To set the interface temperature from the GC 95