Specifications

To use the XY display mode 5–14
To analyze video waveforms 5–18
Measuring Waveform Data 5–22
To make cursor measurements 5–22
To make frequency measurements automatically 5–26
To make time measurements automatically 5–28
To make voltage measurements automatically 5–32
6 Using Option 005 Enhanced TV/Video Trigger (HP 54645A)
To autoscale on a video signal 6–4
To trigger on a specific line of video 6–5
To trigger on all TV line sync pulses 6–7
To trigger on a specific field of the video signal 6–8
To trigger on all fields of the video signal 6–9
To trigger on odd or even fields 6–10
To analyze video waveforms with Option 005 6–12
7 Testing, Adjusting, and Troubleshooting
Testing, Adjusting, and Troubleshooting 7–2
Solving Problems with HP 54645A/D Oscilloscopes 7–3
If there is no trace display 7–4
If the trace display is unusual or unexpected 7–5
If you can’t see a channel 7–5
If you can’t get any response from the oscilloscope 7–6
Getting Service 7–7
To return the oscilloscope to Hewlett-Packard 7–8
Verifying Oscilloscope Performance 7–9
To construct test connectors for digital channels 7–9
To test the digital channels 7–11
Contents
Contents–4