Specifications

Contents
1 Getting Started
Preparing the Oscilloscope 1–4
Check package contents 1–5
Adjust the handle 1–9
Connect the cables 1–9
Power-on the oscilloscope 1–10
Using the digital probes to probe a circuit 1–11
Using the oscilloscope probes 1–13
Adjust display brightness 1–13
2 Front-Panel Overview
Important Oscilloscope Considerations 2–2
HP 54645A/D Front Panels 2–6
Description of Front-Panel Areas 2–8
Front-Panel Operation 2–16
To use oscilloscope channels to view a signal 2–17
To use digital channels to view a signal 2–18
To display signals automatically using Autoscale 2–19
To apply the default factory configuration 2–20
To adjust oscilloscope vertical scaling 2–21
To turn analog channels on and off 2–24
To rearrange the analog channels 2–24
To turn digital channels on and off (HP 54645D) 2–25
To rearrange the digital channels (HP 54645D) 2–26
To operate the time base controls 2–27
To start and stop an acquisition 2–28
To use the Entry and Select knobs 2–29
To make cursor measurements 2–30
To use delayed sweep 2–32
To modify the graticule 2–33
To print the display 2–34
Contents–1