Specifications

6
Connect the ground lead on each set of channels,
using a probe grabber. The ground lead improves
signal fidelity to the instrument, ensuring
accurate measurements.
7
Repeat steps 3 through 6 until you have
connected all points of interest.
8
If you need to remove a probe lead from the
cable, insert a paper clip or other small pointed
object into the side of the cable assembly, and
push to release the latch while pulling out the
probe lead.
Replacement parts are available. See the
“Replacement Parts” chapter for details.
Getting Started
Using the digital probes to probe a circuit
1-12