Specifications

Power-on the oscilloscope
1
Connect the power cord to the rear of the
HP 54645A/D, then to a suitable ac voltage
source.
The HP 54645A/D power supply
automatically adjusts for input line voltages
in the range 100 to 240 VAC. Therefore, you
do not need to adjust the input line voltage
setting. The line cord provided is matched
by HP to the country of origin. Ensure that
you have the correct line cord. See table 1-1.
2
Press the power switch.
The HP 54645A/D performs a self-test, then
shows the display. The instrument is ready
to use.
Getting Started
Power-on the oscilloscope
1-10