Specifications

To return the oscilloscope to Hewlett-Packard
Before shipping the oscilloscope to Hewlett-Packard, contact your nearest
Hewlett-Packard Sales Office for additional details.
1
Write the following information on a tag and attach it to the
oscilloscope.
•
Name and address of owner
•
Model number
•
Serial number
•
Description of service required or failure indications
2
Remove all accessories from the oscilloscope.
The accessories include the power cord, probes, cables, and any modules
attached to the rear of the oscilloscope. Do not ship accessories back to
Hewlett-Packard unless they are associated with the failure symptoms.
3
Protect the control panel with cardboard.
4
Pack the oscilloscope in styrofoam or other shock-absorbing material
and place it in a strong shipping container.
You can use either the original shipping containers, or order materials from
an HP Sales Office. Otherwise, pack the oscilloscope in 3 to 4 inches of
shock-absorbing material to prevent movement inside the shipping container.
5
Seal the shipping container securely.
6
Mark the shipping container as
FRAGILE
.
Testing, Adjusting, and Troubleshooting
To return the oscilloscope to Hewlett-Packard
7-8