Specifications

4
To enter characters into the new label:
a
Press the
Position
softkey until the cursor position in the entry field
corresponds to the point where you want to replace a character.
b
Enter or delete a character.
•
To enter a character, use the Entry Knob to choose a character from
the character list. Then press the
Copy
softkey.
•
To insert a space, press the
Insert Space
softkey.
•
To delete the current character, press the
Delete Character
softkey.
Delete Character
deletes the character under the cursor and moves
successive characters forward by one position.
5
Press the
Assign Label
softkey.
The label is assigned to the selected channel.
Label display is automatically enabled when you enter the Define Labels
menu. Thus, if the labels were off, they are turned on while you define labels.
If you exit the Define Labels menu, and the labels were off before you
entered the menu, they are turned off when you exit.
Using Labels on the Mixed-Signal Oscilloscope
To define a new label
4-57