Specifications

To Autostore Multiple Single Events
To Autostore single events, you first need to configure the instrument to do
single Autostores.
1
Press
Autostore
to put the instrument in Autostore mode.
This causes the instrument to run.
2
Press
Single
to take a single autostored acquisition.
After the single acquisition, the scope will stop.
3
You may want to press
Erase
to display a clean screen.
4
Now pressing the
Single
key will result in an autostored
single trigger.
Each single trigger will be added to the accumulated Autostore results on the
screen.
Run/Stop/Single/Autostore/Erase Operation
To Autostore Multiple Single Events
4-37