Operating instructions

University of Saskatchewan
Electrical Engineering Laboratory Equipment Manual
affect the resolution of the display. Always use the max. volts/div and sweep speed (time/div)
that fits on the display.
The Delayed sweep window is used to expand the waveform ( zoom ). The Delayed
window shows a portion of the main sweep. The display is divided in two, showing the main and
expanded portion. Peak Detection acquisition mode provides more detail when expanding the
waveform.
The XY mode changes the scope from voltage versus time to voltage (y, Ch2) versus
voltage (x, Ch1).
Printing the Display
The 54621D mixed signal scope can not print to the Think Jet printers or Scopecam.
The display can be saved to the front 3.5‖ floppy drive. The floppies are available from the
Technicians in 2C94.
Push Utility and then the Print Confg soft key.
Push soft key Print to: Disk.
Push soft key Format BMP image.
Soft key Factors: set to off.
The scope is now set to print to disk.
Push the hard key Quick Print to save to disk. Load the file from the floppy into a
computer. Delete your files from the floppy before returning it to 2C94.