User`s guide

78 53220A/53230A User’s Guide
3 53220A/53230A Measurements
Parameter CONFigure/MEASure Setting
Low-Level Command/Subsystem
GATE Source
Based on measurement function specified by
the CONFigure or MEASure command.
SENSe:FREQuency:GATE:SOURce
SENSe:TINTerval:GATE:SOURce
SENSe:TOTalize:GATE:SOURce
GATE Start Source
IMMediate SENSe:GATE:STARt:SOURce
GATE Start Slope
NEGative
SENSe:GATE:STARt:SLOPe
GATE Start Delay
TIME
0.0 seconds
SENSe:GATE:STARt:DELay:SOURce
SENSe:GATE:STARt:DELay:TIME
GATE Stop Source
IMMediate
SENSe:GATE:STOP:SOURce
GATE Stop Holdoff
TIME
0.0 seconds
SENSe:GATE:STOP:HOLDoff:SOURce
SENSe:GATE:STOP:HOLDoff:TIME
GATE Stop Slope NEGative SENSe:GATE:STOP:SLOPe
External Gate Source
Gate In/Out BNC
OUTPut:STATe
Burst Gate Auto
On (enabled)
SENSe:FREQuency:BURSt:GATE:AUTO
Burst Gate Delay
0.0 seconds
SENSe:FREQuency:BURSt:GATE:DELay
Burst Gate Time
1.0 us
SENSe:FREQuency:BURSt:GATE:TIME
Narrow Pulse Mode
Off (disabled)
SENSe:FREQuency:BURSt:GATE:NARRow
Math
Graphics
Disabled, including the individual calculate
functions. Other parameters are unchanged.
CALCulate1 subsystem
CALCulate2 subsystem
Auto-level Frequency
Unchanged
SYSTem:ALEVel:FREQuency
Measurement Timeout
Unchanged
SYSTem:TIMeout
Reference oscillator
Unchanged from previous settings.
SENSe:ROSCillator:SOURce
SENSe:ROSCillator:SOURce:AUTO
SENSe:ROSCillator:EXTernal:FREQuency
Reading Format
Data Storage
Instrument Status
Unchanged from previous settings.
Unchanged from previous settings.
Unchanged from previous settings.
FORMat Subsystem
DATA Subsystem
STATus Subsystem