User`s guide

60 53220A/53230A User’s Guide
2 53220A/53230A Software Installation and Interface Configuration
Figure 2-11. Specifying the Address or Host Name.
The firmware update takes a few moments to complete. The 53220A/53230A
will reboot once the update is complete.
NOTE
Following a firmware update, Agilent Connection Expert (if running) may report
that the 53220A/53230A configuration has changed. This is represented by a
yellow triangle and an exclamation point (!) next to the updated instrument. Select
the instrument name, select ‘Change Properties’, and then select either ‘Test
Connection’ or ‘Identify Instrument’ to update Connection Expert.