User`s guide

44 53220A/53230A User’s Guide
2 53220A/53230A Software Installation and Interface Configuration
Remote Interface Configuration
The following sections cover front panel configuration of the LAN, USB, and
GPIB interfaces. The interfaces can also be configured programmatically using
the ‘Remote Interface Configuration’ commands in the SCPI SYSTem sub-
system. This subsystem, plus descriptions of all SCPI commands, is located in
the ‘Programming Reference’ section of the 53210A/53220A/53230A Product
Reference CD.
Configuring the LAN Interface
With the counter connected to the LAN interface, the IP address can be read
from the front panel as follows.
Once the IP address is known, start the Connection Expert utility by clicking
the ‘Agilent IO Control’ icon and selecting “Agilent Connection Expert” from
the pop up menu as shown in Figure 2-3.