User`s guide

40 53220A/53230A User’s Guide
2 53220A/53230A Software Installation and Interface Configuration
Figure 2-2. The Web UI SCPI Command Interface.
Any command in the counter’s SCPI command set can be sent to the instru-
ment. Query commands which include ‘?’ in the syntax return data and can be
sent by selecting Send & Read after the command is entered. Commands which
do not return data are sent using Send Command.
NOTE
Web interface pages other than the ‘Welcome Page’ may be password protected. When
shipped from the factory no password is set; however, an ‘Enter Password’ dialog box may
appear. Click on the dialog box to continue.
If the page is password protected and the password is unknown, pressing [Utility],
(I/O Config), (LAN Reset) on the front panel clears the password.