User`s guide

53220A/53230A User’s Guide 39
53220A/53230A Software Installation and Interface Configuration 2
Web Interface Overview
The following information is an introduction to the counter’s Web interface.
The counter welcome page (Figure 2-1) displays IO information, can be used to
identify a connected instrument, and contains menu tabs for accessing addi-
tional counter functionality.
To easily identify the counter among other instruments using its Web interface
home page, clicking on:
Turn On Front Panel Identification Indicator
changes the counter display to “LXI Web Identify” until the indicator is turned
off by clicking on:
Turn Off Front Panel Identification Indicator
Programming the Counter
Selecting the ‘Remote Control’ icon (second from top) on the welcome page
opens the Interactive IO window shown in Figure 2-2. From this window, SCPI
commands can be sent to the instrument.
NOTE
For ease in (Internet) browser navigation when controlling multiple instruments, open a
separate browser session for each Web-enabled instrument.
NOTE
Although no additional libraries or drivers are required to use the Web interface, the
interface is also accessible from Agilent Connection Expert (ACE). See “Opening the Web
Interface from Agilent Connection Expert” for more information.