User`s guide

53220A/53230A User’s Guide 37
53220A/53230A Software Installation and Interface Configuration 2
Using the Counter Web-Enabled Interface
Operating the 53220A/53230A counter from its Web interface requires a
Java
-enabled Web browser but no additional (i.e. user-installed) libraries or
drivers. The Web interface provides access to the counter’s SCPI command set.
Connecting the Counter and Viewing its Home Page
Connect the counter directly to the PC or to the PC through a network switch
using a standard LAN cable.
Obtaining the IP Address
Turn on the counter and open the Web browser. Allow a few moments for the
counter’s IP address to be assigned (either through DHCP or AUTO IP). The IP
address can be read from the counter front panel as shown.
NOTE
This section describes the Web pages and windows primarily used to program the
53220A/53230A. Refer to “Help with this Page” associated with each Web page
for additional information on functions or pages not covered in this manual.